3

Part Three - Install USB Software

1. Make sure that the PC and printer are both

turned on and running, and that the

printer's LCD display is reading "Ready."

2. Connect the USB cable first to the printer's

USB port, then to an available USB port on

the PC.

3. The Add New Hardware Wizard should

start up, informing you that a new device

has been found. Click Next.

The new USB software is installed through the Windows Plug and Play process.

When the printer is plugged into the PC, the PC should automatically begin a

two-step Plug and Play installation. The first step is to install the USB printing

software, and the second step is to install specific software for your GCC printer

model. The steps for these installations are as follows: